keyless entry keypad, located on the driver’s door

The SecuriCode keyless entry keypad, located on the driver’s door, lets you enter a code to unlock your vehicle.

At some point, you might want to change the original, five-digit security code that came with your vehicle.

Changing this security code only takes a few minutes. Don’t forget to write down your new code and keep it in a safe location.

Before you start

There are a few things you should do before starting step 1:

  • Read the locks and security information in your owner’s manual

  • Find the original, five-digit security code printed on the owner’s wallet card in the glove compartment

  1. Enter the factory-set code.

  2. Within five seconds, press the 1-2 button on the keypad.

  3. Enter the personal, five-digit code you'd like to use.Each number must be entered within five seconds of the previous one.

  4. For the memory recall feature (if equipped), press the 1 • 2 button to store Driver 1 settings or the 3 • 4 button to store Driver 2 settings.

  5. The doors will lock, then unlock, to confirm that your personal entry code has been programmed.

Is this helpful?