Before you start
There are a few things you should do before starting step 1:
- Get a metal or plastic oil-fill funnel, an oil rag and one or two quarts of the vehicle's correct grade of oil. You can find the grade in your owner's manual.
- Park the vehicle on level ground—if the vehicle isn’t level, the oil level can be incorrect when you check it.
- Turn your engine off, and wait 10 minutes so all of the engine’s oil drains into the oil pan.
- Roll up or remove loose clothing, and keep your arms away from the cooling fan(s) when checking the oil—fans can turn on automatically, even when the engine is off.
Open the hood and find the oil dipstick. It’s near the engine and usually has a brightly colored handle.
Pull the dipstick out, wipe the metal section clean with a rag, then fully insert it and remove it.
Your oil level is the highest point on the dipstick that is coated with oil.
If the oil level is between “MIN” and “MAX,” you don’t need to add oil, and can replace the dipstick and close the hood.
However, if the oil level is at or below “MIN,” you’ll need to add oil now.
Find the oil fill location—it may have an oil can icon on it. Remove the fill cap and place the small end of the funnel into the fill hole.
Add oil by pouring in roughly a quarter of the container at a time, waiting a minute for the oil to drain to the pan, then repeating steps 2 and 3 each time. Stop adding oil when the dipstick shows oil at or just below the “MAX” mark.
It's important to add oil in small amounts, and never add oil past the dipstick’s “MAX” level. Too much oil in your engine can be just as bad as too little.
Remove the funnel and replace the dipstick and oil fill cap. Make sure both are fully secured in place, then close the hood.
Your motor oil should be changed every 5,000-10,000 miles, depending on your vehicle’s model year and driving conditions. Many newer Ford vehicles have an Intelligent Oil-Life Monitor that can help you keep track of when an oil change is needed.
Between changes, your vehicle’s oil level can drop a bit within the normal range. However, if it drops to the “MIN” mark or lower between oil changes, you should take the vehicle to your local Ford Dealership and let the factory-trained technicians inspect it. The fix can be as simple as a new oil pan gasket.