When your engine is running, it makes power—but it also makes heat. And that’s where engine coolant comes in.
Coolant circulates through the engine and absorbs heat, helping keep the engine at the right operating temperature.
Coolant also helps keep your engine working as efficiently as possible, helps keep its emissions low, and even helps provide that toasty heater air on cold days.
You should check your vehicle’s coolant level every time you fill up the fuel tank. And if you ever need to add coolant, here’s how to do it.
There are a few things you should do before starting step 1:
Make sure your engine is off and cool, the vehicle is in Park or Neutral, and the parking brake is set.
Open the hood and locate the engine coolant reservoir. It is often a translucent white color, and has hose(s) connecting it to the radiator.
The reservoir has a fill range marked on the side. If your engine is cold, the coolant level should be up to the cold fill line.
Loosen the reservoir cap just a little, then step back while the pressure releases. Then, remove the cap completely.
If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water.
When the coolant rises to the cold fill line, replace the cap and tighten it until you feel it click. Close the hood.
Ford Motor Company has used four different types of coolant since 2002. Here are the colors as well as the relevant models:
Light Green: Used in all models up to 1999 and some models from 2000 through 2003
Yellow: Used in all models from 2004 through 2008 and some models from 2002 through 2013
Dark Green: Used in some models from 2009 through 2012
Orange: Used in some models from 2010 through 2013
For the 2013 models, only the E-Series Econoline vans and some motorhome chassis use the yellow coolant. All other vehicles use orange coolant.
Of course, always check your owner’s manual for the most specific information about your vehicle’s coolant needs.